this post was submitted on 26 Dec 2024
2 points (100.0% liked)
Photography
0 readers
90 users here now
All things photography. Share your own original photos, your questions, your inspiration.
Rules
Share your own original photography. No NSFW images. Be Nice.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Another quirk: the one of the bubble levels in mine is a bit off. This is a common problem, and why I never trust the levels in the head - I only make adjustments based on the levels directly on the camera body.
Anyway, for precision work, the Rogeti is more usable than any of the Arca-Swiss heads I've used. Only the Linhof Micro 3D (more expensive and with a more limited range of movement) does better, at least among heads I've used.
Neglected to include links:
Rogeti: https://rogeti.com/products/rg1
Linhof: https://linhof.com/en/3d-micro/
Arca: https://arca-swiss-usa.com/products/c1-cube-geared-tripod-head
Disclaimer: I bought, borrowed, or rented everything discussed here, with my own damn money, not vendor freebies. Don't bother liking or subscribing to my youtube channel, because I don't have one. And my links are just links, not "affiliate" advertising.
I don't even have cookies on my own web site. It's not necessary to monetize every human interaction.
@[email protected] You monster! 👀
All that is predicated on my process for composing geometrically precise architectural photos (zero or single point perspective), which is roughly:
Find a good view of the subject and put the tripod there (Google street view is often helpful for preparation).
Use the LOWER pan control to aim the camera approximately toward the subject.
Use the X and Y controls to level the camera, using spirit levels on the camera body. This should make vertical lines on the subject vertical.
...
...
Use the TOP pan to rotate the camera parallel to the main face of the subject, until horizontal lines on that face of the subject appear horizontal.
Use shift on the camera to compose the final framing.
Finally, at long last, capture the image exposure at an opportune moment.
Note that most lenses have some geometric distortion, especially toward the edge of the circle. You can correct that in post, but in the view, it's best to use the center of the frame to check geometry.
So, basically, what I generally do is work from the bottom tripod and camera controls toward the top, in a way that avoids needing to re-adjust controls once I've properly set them.
Anyway, all this should help explain why I'm somewhat obsessed with optimizing my tripod and tripod head setup. It's what I'm interacting with most closely when I'm actually making a photo, even more than the camera and lenses, and it's the stuff for which errors are often very hard to correct after you've made the exposure.
It's also why I'm impossibly slow and annoying to be around when I'm making pictures.
@[email protected]
So much of the tech you mention is way over my head (and budget) but I look things up and have learned from your posts. Thank you!
@[email protected]
I only follow you for the great photos and the occasional recap of the story of locksmiths trying to run you out of town