3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or [email protected]
There are CAD communities available at: [email protected] or [email protected]
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
Created a new replacement dust adapter for my circular saw that replaces the original one. The original didn’t fit my Nilfisk Multi II 30 shop vac. Now I don’t need to fiddle with the adapter I first made.
Sharing if someone has the same combination: https://makerworld.com/en/models/996710
**Edit: ** Found it. https://hackaday.com/2020/09/23/reforming-3d-prints-with-salt-and-heat/
There is an article out there somewhere in the ether where someone printed with 100% infill, then put the print in a glass container and packed it with salt that they had pulverized with a coffee grinder into a powder and re-melted / fused it. Their intent was for making clear parts since they were using transparent filament, but it should be great for increasing the adhesion of the layers as well. Ideally, it would become more of a monolithic plastic part than a bunch of layers.