3DPrinting

16320 readers

147 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

[email protected]

Are 3D-printed objects waterproof? (lemmy.sdf.org)

submitted 2 days ago by [email protected] to c/[email protected]

37 comments fedilink hide all child comments

I have a piece of test equipment that needs to stay underwater for days. Normally I would use or make a waterproof case with a lid and a gasket.

Instead, I'm wondering if I could print a box, pause the print just before the top face, put the device inside and then print the top face over it. No openings, no nothing, and the device works by induction so it doesn't need to physically connect to anything.

But this would only work if 3D-printed PLA walls are really waterproof. After all, 3D-printed features are kind of a bunch of wires more or less loosely attached to each other, so I wouldn't be surprised if water could leak through under pressure.

Before I spend any time assessing this myself, has anybody tried printing waterproof enclosures?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 6 points 2 days ago* (last edited 2 days ago) (1 children)

From experience printing a bunch of different planters with varying settings and printers, without post-processing/sealing the answer is "not reliably". You can increase your chances by using many perimeters and surface layers, high heat, and thicc extrusions, but you are still just stacking swiss cheese slices on top of each other hoping the holes don't line up.

With days submerged, even the tiniest of defects means water can and will seep in.

[–] [email protected] 4 points 2 days ago

Have you tried https://github.com/TengerTechnologies/Bricklayers yet?

I think this might improve watertightness considerably as in the tests it increased layer adhesion/strength by quite a lot.