flashlight

3015 readers

1 users here now

Portable illumination

Rules:

Be excellent to each other
Don't be the reason we need to make more rules

founded 2 years ago

MODERATORS

[email protected]

FW1AA with RGB+reflector (lemmy.world)

submitted 2 years ago* (last edited 2 years ago) by [email protected] to c/[email protected]

14 comments fedilink hide all child comments

Hello, first post here :D

A few month ago I modded a FW1AA with boost-buck driver for NiMH/li-ion and with RGB LEDs.
I used a TIR lens for the aux led to shine through, unfortunately it had artefacts in the spill that ended up a bit too distracting so I went back to the original reflector and used a thin flex PCB under the reflector with tiny LEDs that fit in the opening. I’m very satisfied with the result, plus the beam with the 519A+ SMO reflector is surprisingly good.

Edit : putting the video in the text since it didn’t create a YouTube thumbnail : https://youtu.be/u6aYa8FEt3s

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 2 years ago* (last edited 2 years ago) (1 children)

Circle is 5.6mm :

https://oshpark.com/shared_projects/6tVRn8Ux

[–] [email protected] 0 points 2 years ago (1 children)

So this should work for the original FW1A?? That is exactly what I need!

[–] [email protected] 0 points 2 years ago* (last edited 2 years ago) (1 children)

I guess it should. Unless the corners of the flex boards overlap with the MCPCB solder pads, since it was designed for a smaller MCPCB.

[–] [email protected] 1 points 2 years ago

Awesome. I'll order some soon and let you know. Thanks so much!