this post was submitted on 03 Feb 2025
5 points (100.0% liked)

Meshtastic

504 readers
9 users here now

A community to discuss Meshtastic (https://meshtastic.org/docs/introduction)

founded 1 year ago
MODERATORS
[email protected]
5
asymmetric SNRs (lemmy.zip)
submitted 1 week ago* (last edited 1 week ago) by [email protected] to c/[email protected]
4 comments fedilink hide all child comments
 

So there is a router 3.7 miles from my house that i can hear between 2 and 5 SNR but its hearing my transmissions between -4 and -18 SNR with a -10 average (5 traceroute tests). Shouldn't it be able to hear me just as well as I can hear it? I can only think of two possible causes for this.

  1. The router has a much higher noise floor than I do
  2. The router antenna is more than 33cm tall and has directional lobes and null zones.

However, that second explanation seems off simply because if it wasn't transmitting my direction, I shouldn't be able to hear it as well as I can.

Thoughts?

Edit:

  1. My antenna is not a full 33cm So does not radiate the signal efficiently.
you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 4 points 1 week ago (1 children)

No. Sending and receiving are two separate processes. While you yourself might hear a train whistle over a Kilometer, don't expect that the train hears you shouting at it.

[–] [email protected] 1 points 1 week ago (1 children)

True, but since this is license-free, the radios should be putting out about the same amount of power. I would totally understand it if this were a licensed band and the router was putting out much more power than the client, such as repeaters on amateur radio being able to put out 50 or 100 watts where my HT can only put out 5 watts.

[–] [email protected] 1 points 1 week ago (1 children)

Do you have the exact same hardware on both sides?

[–] [email protected] 1 points 1 week ago

No, router is a WisBlock 4631 with a 2.5 wavelength antenna (according to a local) and my node is a SeeedStudio SenseCAP T1000-E with what i think is an 1/8th wave antenna.

Maybe at some point I will buy another node that will allow for an external antenna and put a full wavelength antenna on it, which should boost the radiated power pretty significantly.