3DPrinting

16304 readers

197 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

[email protected]

Are 3D-printed objects waterproof? (lemmy.sdf.org)

submitted 1 day ago by [email protected] to c/[email protected]

37 comments fedilink hide all child comments

I have a piece of test equipment that needs to stay underwater for days. Normally I would use or make a waterproof case with a lid and a gasket.

Instead, I'm wondering if I could print a box, pause the print just before the top face, put the device inside and then print the top face over it. No openings, no nothing, and the device works by induction so it doesn't need to physically connect to anything.

But this would only work if 3D-printed PLA walls are really waterproof. After all, 3D-printed features are kind of a bunch of wires more or less loosely attached to each other, so I wouldn't be surprised if water could leak through under pressure.

Before I spend any time assessing this myself, has anybody tried printing waterproof enclosures?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 21 points 1 day ago (1 children)

The guys from Prusa Research have a lenghty blog post about watertight 3d-prints: https://blog.prusa3d.com/watertight-3d-printing-part-2_53638/ This might be a good source for tipps and tricks!

[–] [email protected] 8 points 1 day ago (2 children)

I myself have made a couple of very simple watertight (non essential) prints for scubadiving. They are holding up really well!

[–] [email protected] 4 points 1 day ago (1 children)

Thanks! Well, I was kind of hoping to throw something on the printer and have a working system without too much work. But it looks like achieving proper dependable watertightness might be a whole side project of its own.

I think I'll just order the proper ready-made ABS case and wait until it arrives, most likely.

[–] [email protected] 3 points 1 day ago

But it looks like achieving proper dependable watertightness might be a whole side project of its own.

This is the case, especially if you want watertight prints right off the printer. Post processing (eg coating, smoothing, etc) are another approach. Post processing also seems like it would be more consistent print to print.

[–] [email protected] 2 points 1 day ago (1 children)

I am interested in it. What are you making for scubadiving that needs to be waterproof?

[–] [email protected] 1 points 3 hours ago

Mostly covers for different hoses and valves for scientific instruments used underwater. For the seals I mostly use O-rings.