3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or [email protected]
There are CAD communities available at: [email protected] or [email protected]
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
I need to print some improved tubing connectors, 3 different types - 80 Pcs total, for a pair of crappy shelving units my Wife bought off of Walmart. The originals were as minimal material as possible without missing the nylon tree completely.
The Klipperized Mk3s with a .60mm nozzle is nearly as fast as the mini with a .40mm nozzle. Once again proving it's not how fast you say you can go, but how fast the parts let you go..........
Your Bear mod will be a lot different than my stock frame and E3D Revo V6 hotend. The profiles I have been using are based on what I think I can get away with from what I learned about from the input shaping. I think you can get away with a bit more than I can. Particularly if you went from the 8mm linear rods to a set of linear rails. That would be far more rigid and vibration damping along with the heavier frame. Did you go with a high flow extruder too? I've been debating on a .40mm Revo ObXidian high flow nozzle lately. But The cost is high even for the Revo eco-system.
I kept them with linear rods, rails were more than I wanted to do at the time. I changed over to a dragon HF after liking it on my voron, just to keep common parts. Hey, its good to know at least that I can probably push more, tuning a profile for it is definitely going to be on my list.
The ObXidian nozzles are really nice, I just have a 0.4mm and 0.6mm regular nozzles, I've used a bunch of hardened coated nozzles before, seem nicer than those but haven't tested much.
I think those linear rods and bearing are the weak part of the system. They are too prone to vibrations and whipping around at high speeds. But I'm too lazy to go after more upgrades on my printer at this point.
I do have a standard flow .60mm ObXidian for abrasive filament, but they were a LOT cheaper then. Plus I already have a lot of brass Revo nozzles already. But...........I want.