this post was submitted on 20 Nov 2023
1 points (100.0% liked)
Home Networking
239 readers
1 users here now
A community to help people learn, install, set up or troubleshoot their home network equipment and solutions.
Rules
- Please stay on topic.
- Please use the search function to look for keywords related to what you want to ask before posting since most common issues have been answered.
- No Ads. This community is for support and discussion. Ads and self promotion are not welcome here.
- No product reviews or announcements. If you have a question about a product, be specific about what you want to know.
- Be civil. Don't be a jerk. Not being a jerk is surprisingly easy.
- No URL shorteners. URL shorteners tend to hide the real use of a link. For this reason, please use normal links, even if they're long.
- No affiliate links.
- No gatekeeping. With profession shall come professionalism. Extend help without judging others for their ignorance. The same goes for downvoting of comments or posts for "stupid questions" or not being as knowledgeable as others.
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I would recommend a semi-P2P solution.
Buy an older Ubiquiti Litebeam M5 or M2.4. Buy whichever signal you want to from your main router. The M5 would be Great if your laptop/phone has good 5GHz signal. Set up the LBE outside the shed where you plan to mount it. Give it an static IP based on your Network IP outside the DHCP range (e.g. the main router is 192.168.1.1 and dhcp gives 192.168.1.100-199, so give your LBE the IP 192.168.1.11). Access it again using the new IP, go to Wireless settings, disable AirMax, and connect it to your main router's WiFi. When its connected you are good to connect it to an AP (below).
Buy any router you can use as an Access Point. A cheap TP-link AX10 or any spare router your have. You'll need to set it to Access Point mode or disable DHCP at least. Then give it a static IP based on your Network IP outside the DHCP range (e.g. the main router is 192.168.1.1 and dhcp gives 192.168.1.100-199, so give your AP the IP 192.168.1.2).
Connect the LBE to the new "router" (now an Access Point) via lan-to-LAN ports. Careful not to use the LBE's PoE port. Voila!