Picking up from last time, I got Crude Oil laid in for real this time, to produce Heavy Oil Residue and Polymer Resin.
Sticking with the strategy of connecting to and from the big Refinery wing on the front of the facility by running underneath the main body, I pulled water across the wing to meet up with the Polymer Resin, both of which need to run over to the small wing on the opposite side of the building. These make Polyester Fabric.
With the Polymer Resin now having somewhere to go, Smokeless Powder is now running plenty enough for me to snag 400 of them for research.
The Manufacturer floor is juuuust about all that's left for this factory. However, while planning it out, I noticed I was no longer producing any Iron Rebar. I eventually traced it back to here.
This belt is definitely NOT supposed to clip through an entire merger, and connect to an adjacent splitter instead.
I had to setup a few different temporary splices like this to bleed all the ore out of the belts, as well as fully-rebuild all the elevators going through the floor to feed into the Constructors using Steel Ingot.
Back on track, we've got 3 Manufacturers dedicated to making Gas Filters.
And the other 7 dedicated to Explosive Rebar.
Finally, I've got a few things to wrap up on the Assemblers floor. The last big batch of Assemblers can now be connected up to make Cluster Nobelisks.
The last item is a single Assembler for making Rifle Ammo. Unfortunately, the most effective way to get the Copper Sheet for that to where it needed to go was to run it around the ENTIRE circumference of the building. In retrospect, maybe it would have been better to build the logistics floors for this building to 7m, instead of 5m, to allow for 3 layers worth of belting, but this Copper Sheet line was really the only problematic thing I had to deal with, due to only having 2 layers.
Running the Smokeless Powder for Rifle Ammo was distinctly simpler: a single 2m length of belt from an adjacent splitter.
Actually, the LAST last item was regular Nobelisks. Which I already had fully producing, but I needed to pull off the overflow to be sent down for uploading and sinking.
Aaaaaaaand we have a nice fat sushi belt for uploading and sinking everything.
