Brutticus

Hello Lemmy,

Youve been so helpful over the last few months. Maybe someone can help me with this.

I have this butchers block countertop with an undermount sink. I had it installed 18 months ago. I sealed it, and then this part was being warped and forced apart. I put in wood block, I resealed it. But as you can see, its coming apart again.

I followed all the advice of the handy men I know, including the one that installed it. The only thing I can think of is, aside from reblocking and sealing it, maybe a line of silicon around where the faucet comes up, and around the lip where the sink is flush with hole its mounted in, both things they assured me wouldn't be necessary. Should I be concerned about a leak on the underside? Am I just hosed?

(More pics of the whole set up on request)

hello Lemmy,

Every little while I update you on my basement build as I encounter problems. I am pleased to tell you the city is out of our hair. We have gotten everything up to code.

So here is where things get weird. My roommate and I live down here in the basement. Our rooms don't have drywall or tile ceilings. Currently, our funds are exhausted, and I am not looking to pick a fight with the city over permitting with the ceilings. That's a someday kind of thing.

We would like a small modicum of noise privacy from each other though. Right now the walls go up to the top plate, and end at the joists. The joists are open, as illustrated.

I am thinking I put something in the joists. My thought was just to grab some faced fiber glass insulation, staple it in there, and cover up the other side with a piece cut out from a blanket. I was also thinking maybe some XPS, which would be easier to cut to size and shape around infrastructure. I'm worried about foam board's flammability. I was also checking around my options with various blanket types, finding wool to be a good option, and a welding blanket to be an option as well.

Am I insane? Are the words coming out of my mouth still making sense? Does anyone have any idea what I'm talking about? or any suggestions? Help would be appreciated.

I bought this cheap bathroom vanity off of amazon and we assembled it. We cannot get the drawers on. These silver things get in the way. When I get them mounted in a way I feel is correct they prevent the drawer from closing all the way. I haven't dealt with anything like this.

Does anyone know how to mount it? I'm sure once its done Ill feel like an idiot for how simple it is.

Thanks

Oh boy Fedi, do I have a weird one.

Ive posted here a few times regarding my basement build, and one of the handymen noted that if I am not going to cover up my ceiling, I have two exposed I beams. One runs through the kitchen, and one through a bedroom (mine). We were talking about mounting a spice rack, and he said I could mount a piece of wood on to an I beam trolly.

These things are cheap, and they are strong. What kind of fuckery can I get up to with them? Especially one in my bedroom? Is there anything ceiling mounted you just wish you could slide across the room, and back again? I'm envisioning something I can collapse against the wall.

Is this just insane?

Hello,

I have two interior doors to hang in my basement. One of my friend said he could cut/ hang them, but he suggested looking into hiring home depot's contractors install them, because I would still have to get them delivered anyway.

Okay, the problem: when I started this basement project, I hired some amateurs. They hung my walls. They eventually disappeared, and I had to finish them on my own. When they built my rough openings, they didn't even make them uniform with eachother. one of them is 38.25 by 76.75 in. One is 38.75 by 78 even.

I checked into pre hung doors, and they are all 80 inch tall, and they recommend another 2 in. Apparently interior door manufacture is controlled by a regional monopoly: anything a few inches shorter will double the price, or potentially more. And of course, add a month for the custom manufacture.

the rub is that I would have to wait an additional month for the contractors, and they want an exorbitant amount.

So I guess my question is, what are my options? Can I cut a pre-hung door and frame down to size? Is there something I should know about? Should I just get someone to hang a door cut to size? Or should i just give up and pay the money?

Hello, everyone. For the past few months, I have been renovating my father's basement, building an apartment for myself. The water, electrical, subfloors, and walls are in. All that really remains are the Kitchen Sink, the kitchen floor, and the doors. (And the bathroom, but thats another can of worms. And the ceiling.

I have been going back and forth on the ceiling for a while. I have been resisting drywall, and my dad is dead set against it; there is a lot of infrastructure down there that would both make it difficult to install, and needs to remain accessible. Furthermore, its only 8feet to the joists, so losing half an inch is kind of a problem. I had considered leaving it alone. I really liked the exposed look, and was even looking into Joist Shelving.

The last few weeks have proven to me though, that I really need to soundproof the ceiling. There is an entire cottage industry on youtube based around recommending soundproofing products. I had one handyman recommend streamer foam, which is different from accoustic foam (apparently!?), Ive seen people recommend Green Glue, and then someone else say, you get the same results with carpet glue. I see some people say Mass Loaded Vinyl could be useful, and then some one else say its expensive and supplemental (but might still be handy for pipes and HVAC). I was looking at sound proof blankets, and the big blocks of Styrofoam insulation they sell at home depot. I was considering hiring someone to install a drop ceiling.

Does anyone have any insight that might help me? I have nothing up in the ceiling currently. I have no real issue mixing and matching solutions, although I am somewhat still resistant to drywall ceilings.