My plan is to only connect the docking station to the USB switch. The docking station handles keyboard/video/mouse. Not sure if that's even supported :D
sylverstream
AC Lite. It doesn't need controller, it's standalone. I configure it via the mobile app.
It's a standalone AP. No controller. Two different SSIDs.
I've had it running now for 2 hours and of course now it works. The only change since last time is that I've reset the AP and did a firmware upgrade. Perhaps that fixed it...
There's only a single DHCP server, a Pihole, which also serves as DNS. Switch B is a cheaper switch, so that may be the culprit. I use it for heavy downloading from my Xbox and that is never a big issue. Speeds fluctuate from 100 to 900mbps (my max) but that's not necessarily a switch problem.
Yep, thanks for checking, there's only 1 DHCP server on my network. I've just moved it back to behind switch B and will do more investigation when the problem occurs again.
I've just moved it back to behind switch B, will do testing as you suggest.
The switch doesn't have POE, the Unifi AP does use POE via its own POE injector.
Thanks. I've recently reset it, it has its own IP via DHCP. I've just moved it back to behind switch B, will do testing as you suggest.
Yep just placed a couple! Thanks.
I placed a pixel. Oh yeah!
OK I'm in. Never done this before. Will have a look!
I tried, got the code, then a 400 bad request.
Right now it all works by just swapping the usb cable from the docking station to the PC and vice versa. Monitors, keyboard, mouse are all connected to the docking station; the PC uses it as well. So a USB switch seems the easiest.