Morphit

joined 2 years ago
[–] [email protected] 2 points 1 day ago

If you have the docker-compose.yml locally, you can nix run github:aksiksi/compose2nix to translate it into a nix file for inclusion in your nixos system config. I think that could be done in the config itself with a git url but I'm not that great at nix. You will surely still need some manual config to e.g. set environment variables for paths and secrets.

[–] [email protected] 2 points 2 days ago (1 children)

How do the DNS servers resolve local hostnames then? The pihole DHCP integration adds local hostnames to DNS when they are assigned an address. If there's two DHCP servers handing out leases, presumable only one would be accepted, how then would the DNS servers sync those names?

I think I had my secondary pihole resolve local names from the primary, and leases were copied over on a cronjob in case the secondary DHCP server had to be enabled.

[–] [email protected] 1 points 3 days ago (3 children)

Not that it particularly matters for just queries. The problem is that DHCP can only be enabled on one host. If that one fails then devices can't get on to the network themselves. I'd like to know a good way to have a failover DHCP server - my janky cronjob isn't great.

[–] [email protected] 3 points 3 days ago* (last edited 3 days ago) (2 children)

Where do you do DHCP? I had a primary pihole with DHCP enabled and a secondary with a cron job that enabled DHCP if the primary was down or disabled it if the primary was working. The cron job did sync DHCP leases from one to the other but it was a bit janky. I tried to update the secondary to pihole v6 and hosed it so I have no backup for now. I'd like to re-image the secondary and get a better setup - when I have time.

Edit to say I really wanted to try keepalived - that's really cool to fail over without clients noticing.

[–] [email protected] 1 points 3 days ago

How are you setting font size? I'm running Plasma 6.3.5 and 150% desktop scale looks identical to 100% with a 150% page zoom in Firefox. Just scaling fonts sounds like it would make everything non-text appear the wrong size.

I do notice a weird behaviour where Firefox renders at 200% scale when it's entirely within a display at 100% scale. If it overlaps another display at all then it uses the appropriate scale for each monitor. Maybe that's a setting somewhere.

[–] [email protected] 1 points 3 days ago

This is the default in NixOS when plasma6 is enabled. I went down the rabbit hole checking, it's set here.

[–] [email protected] 2 points 3 days ago (2 children)

What's wrong with fractional scaling in Firefox? It seems to work fine for me with kwin_wayland. Even if I have different scaling on each monitor, Firefox seems to respect it fine. Some really old software is a bit funky running through xwayland but nothing showstopping.

[–] [email protected] 37 points 3 days ago (2 children)

Solar photovoltaic doesn't involve steam. We can be solarpunk as well!

I guess hydro-power uses steam in the global water cycle so I'll give you that. Radio-Thermal Generators are all solid state, but not much power on earth comes from them.

[–] [email protected] 2 points 3 days ago

Think of the speeds you could fly at with no drag! I'm so bummed that the Grace Hopper drone didn't get to fly after Intuitive Machines fluffed their second landing. That would have been awesome outreach from NASA.

We want drones on the moon!

[–] [email protected] 2 points 1 week ago

Yeah. Given that they kept the engine running at idle for a while, I was half expecting to see a trail. I'd like to know the dynamics of the touchdown. I'm sure they'll figure out most of it but they probably prioritised payload data over images of the touchdown.

Commiserations to IM. Really unlucky to fix issues from their first mission then end up with the same, if not a worse, result.

[–] [email protected] 4 points 1 week ago

Spirit and Opportunity used the airbag landing system. The sides of the tetrahedron could open with enough force to right the platform no matter the orientation. https://en.wikipedia.org/wiki/Mars_Exploration_Rover#Airbags

Doing that on the moon wouldn't be very mass efficient. It'd need a skycrane part outside the airbags. Much more efficient to land the right way up.

Here's hoping ispace can land Hakuto-R number 2 in June without incident. 🤞

[–] [email protected] 5 points 1 week ago (3 children)

The money shot:

Their update states that their batteries are depleted, they don't expect them to recharge and that the mission is now over.

 

Has anyone watched the Secret Level shorts released so far?

Unreal Tournament was a huge nostalgia hit for me and I think the episode was a great interpretation of it. I highly recommend for anyone who played.

The Warhammer 40k episode was also great though I don't have the same kind of investment in the games or media there. The others seemed fairly good for what they are but there's only so much that can fit in a 5-15 minute piece.

Amazon Prime Video link for anyone interested.

 
 
 

Some neat clips of the FLEX rover being driven and the hardware prototypes they have. The video seems to mostly serve as a hiring call though.

 

No word about their plans, but a video on the steps taken to ruggedise a cube sat for 10k·g acceleration. Seems like they're still doing something.

 

This video appeared on my home page and I had to look twice at the thumbnail: The Tomb of Saint Peter Explained

 

Here's the requisite Manley analysis of the GEM 63XL SRB anomaly on today's Vulcan certification flight.

 

I'm upset that a meme I tried to remake with Unicode box drawing characters lines up terribly in apps: https://lemmy.ca/post/28490027 Shouldn't code blocks render in monospace?

On Lemmy's web frontend it's perfect:

On Connect it looks like this:

On Jerboa it's basically the same:

Eternity does use monospace but the box drawing characters seem to be too wide.

All I can find about it here is one post from a year ago: https://lemmy.ca/post/1492857

 

cross-posted from: https://feddit.uk/post/12276336

Sorry for the crap photos - I just wanted to share these extra keys I added to my Lily58.

I noticed there was a gap in the matrix so I tacked a spare hot-swap socket to the pads on the back of the PCB. That worked with minimal modification to my QMK set-up. I couldn't really use it dangling off some wires so I set out to make an extension that would slot in and be retained by one of the standoffs. I don't have a laser cutter or 3D printer so I just hacked these out of a sheet of ABS plastic following a printed template and glued them up. They're nice and solid and line up really well, despite being rather rough around some of the edges.

I'm finding the 1.5U keys a bit confusing at the moment, swapping them out for 1U keys makes it a bit easier to home my thumbs. These are certainly much easier to access than the outermost keys on the lower row or the keys below the display. I'm thinking they need to be called Lily Pads.

 

cross-posted from: https://feddit.uk/post/12276336

Sorry for the crap photos - I just wanted to share these extra keys I added to my Lily58.

I noticed there was a gap in the matrix so I tacked a spare hot-swap socket to the pads on the back of the PCB. That worked with minimal modification to my QMK set-up. I couldn't really use it dangling off some wires so I set out to make an extension that would slot in and be retained by one of the standoffs. I don't have a laser cutter or 3D printer so I just hacked these out of a sheet of ABS plastic following a printed template and glued them up. They're nice and solid and line up really well, despite being rather rough around some of the edges.

I'm finding the 1.5U keys a bit confusing at the moment, swapping them out for 1U keys makes it a bit easier to home my thumbs. These are certainly much easier to access than the outermost keys on the lower row or the keys below the display. I'm thinking they need to be called Lily Pads.

 

Sorry for the crap photos - I just wanted to share these extra keys I added to my Lily58.

I noticed there was a gap in the matrix so I tacked a spare hot-swap socket to the pads on the back of the PCB. That worked with minimal modification to my QMK set-up. I couldn't really use it dangling off some wires so I set out to make an extension that would slot in and be retained by one of the standoffs. I don't have a laser cutter or 3D printer so I just hacked these out of a sheet of ABS plastic following a printed template and glued them up. They're nice and solid and line up really well, despite being rather rough around some of the edges.

I'm finding the 1.5U keys a bit confusing at the moment, swapping them out for 1U keys makes it a bit easier to home my thumbs. These are certainly much easier to access than the outermost keys on the lower row or the keys below the display. I'm thinking they need to be called Lily Pads.

 
view more: next ›