MrZee

joined 2 years ago
[–] [email protected] 3 points 1 month ago

My best guess is to use a spray lacquer for enamel, such as this:

https://a.co/d/ixJ7knW

I suspect the “brass” over zinc that is on that clip isn’t just brass - if it were brass plated zinc, I’d be totally comfortable using that spray lacquer over it. Instead, it’s probably some type of brass colored paint (or paint containing actual brass.

This means that you have mystery paint (and mystery “enamel”) that you are trying to coat. Because of that, no matter what top coat you choose, there is a chance it won’t work well and the solvents in the top coat could melt/harm the clip.

But… if I were in your situation, I would try the spray above and cross my fingers.

If you go that route:

Gently dab a bit of rubbing alcohol somewhere that you won’t be too sad if it hurts the finish. Give it a little rub. If it doesn’t mess with the finish, then you’re probably good to use rubbing alcohol to do final cleaning before top coating with lacquer.

Spray a tiny bit of the lacquer on a something (like the corner of a paper towel. immediately rub it on a spot on the clip to do the same type of test. Is the finish ok? Then you’re probably good to proceed.

Before spraying, clean the clip gently but thoroughly with dish soap and water. Rinse well. Dry well.

Give the thing a good rub with a soft cloth and rubbing alcohol to get any other remnants/grease off the clip before painting.

Give the clip a light coat of spray enamel. Follow directions for ambient temperature and recoat time. Give it another coat a bit heavier. Maybe even a third.

Let it dry and cure for a long time. The lacquer will seem completely dry and “done” after a day, but it won’t be fully cured. Giving it time to fully harden before messing with it too much.

Other notes: dust is your enemy. It’ll stick to your top coat while it’s drying. Try to minimize dust and similar nasties.

If you haven’t done used spray cans much, learn to use them first. Do a practice pass on something you don’t care about. It’s really easy to put on too much and have your clearcoat run. No fun.

[–] [email protected] 5 points 1 month ago (2 children)

This person is correct.

I’ve finished, painted, sealed, and repaired enough stuff to know that “maybe try clear nail polish” is a terrible idea for OP.

Nail polish is very hard to get to go on smoothly over a large area and OP is very likely to end up with an uneven or marred finish. If you just put down nail polish, you are not going to get a lasting finish on much of any material without cleaning and degreasing it first.

I would clean/degrease (I don’t know what to use as I can’t tell what the material is). I would lean toward using some type of spray top coat (again, I don’t know which product because I don’t know the material). You still need to know how to spray on finishes, but I find it much easier to do well than brush on finishes.

[–] [email protected] 204 points 1 month ago

Yep. Ken Chang is a comedian and does LinkedIn satire.

[–] [email protected] 2 points 1 month ago
[–] [email protected] 20 points 1 month ago (2 children)

When police think they have right suspect they often do everything they can to prove that person did it. Essentially, once they have their targets set on a suspect, they shift from trying to figure out who may have done it to putting all their resources into finding evidence against the suspect and building the strongest case they can against them. This includes ignoring evidence that is counter to their theory and discontinuing investigation of other leads.

Their goal at that point is to convict. Because, to them, getting a conviction is success and the person going free is failure. Alternately, getting the person to “commit suicide” is success because they can claim that they were guilty and no trial is necessary.

It’s all about winning and getting a conviction because conviction=justice=case closed. And that means the public can rest soundly knowing “justice” has been served. Especially after PR has done their work.

Prosecutors are the same. They treat their job as finding anything and everything to get the conviction. Exculpatory evidence is ignored and buried. If “evidence” is planted/manufactured, they do their best to ignore and hide that fact and make said evidence look real. It’s the defense's job to prove innocence. In theory, the police should be working to find and provide evidence for both sides, but the police and Prosecutors anre working toward the same goal, leaving the defense severely hindered.

This is the system that railroads people into conviction. They use the media to amplify their story and make it look like they are infallible. When information comes out that counters the police/prosecutor story, they circle the wagons to protect each other and discredit the information that contradicts them. Because they think that they are the good guys and even if they got something wrong, their original hunch must have been right.

[–] [email protected] 5 points 3 months ago (3 children)

Just to make sure I have the situation correct:

You filled a tub that you don’t normally use with water (for an emergency supply). A day or so later, the ceiling and wall directly below the tub are soaked. You then drained the water. 20 minutes later you still hear dripping so wonder if it was the water in the tub or something else.

It’s possible the supply line to the tub faucet cracked or otherwise started leaking when you filled the tub, but it seems much more likely that the water in the tub was the source.

The drain was plugged when the leak occurred, so the drain lines themselves are unlikely to be the issue.

This is a fiberglass/plastic tub, right? I think the tub itself is slowly leaking either from a hairline crack or from around the outside edge of the drain. This leak slowly soaked and pooled on the floor beneath the tub. Now you are hearing that pooled water drip down.

I’d do a careful crawl of the tub and see if you can find anything that appears to be a crack.

I’d keep listening to the drip rate in the wall and see if it’s subsiding. Hopefully it is. At that point, it’s figuring out what, if anything you can do for mitigation. My first thought is heat and airflow in the room with soaked walls/ceilings.

[–] [email protected] 9 points 3 months ago

The Anarchist’s Cookbook is actually legal to possess (and buy and sell). It’s a common misconception that it is illegal. In the US, at least.

[–] [email protected] 3 points 4 months ago* (last edited 4 months ago) (1 children)

Non-expert here, but something I’ve read about popped in my head reading this, and I suspect it may be part of the solution you’re looking for.

Look up audio ducking. My understanding is that ducking means dynamically lowering the volume of background tracks when you want a voiceover (or other track) to be in the forefront. It looks like Davinci has settings to do ducking automatically.

[–] [email protected] 33 points 5 months ago* (last edited 5 months ago)

Wow… I feel like “substance over form” contradicts a core sovcit belief: That there are specific magic phrases and processes that must be executed precisely to be valid. The systems in place intentionally hide, obscuring, and otherwise make it as difficult as possible for the sovcit to perform the rituals correctly. But if they do, they will “win”.

Of course, leave it to a sovcit to find another contradictory concept to shove into the rest of their contradictory beliefs.

[–] [email protected] 5 points 6 months ago

Hello, 30-years-ago me. My sister and I had a similar age gap. We had an amazing relationship/friendship throughout our childhood and it was really hard when she left for college. The good news is that we still have an amazing relationship and she is still the best sister I could ever ask for.

It’s a funny thing that when we are young, everything feels so permanent when in reality, your life is changing incredibly quickly. When you get hit by something like this, it’s uncomfortable as fuck to see that reality. Change is hard, but it also leads to and comes along with growth... and growth is good.

I don’t say this to be dismissive of what you are going through, only to say that change happens. It is a part of life that we learn to deal with because it can’t be avoided. What is happening in your life probably hurts. It’s probably scary. The uncertainty sucks. All those feelings are valid.

She will be farther away. You will see her less. She is going to be incredibly busy at times. But she is also there for you and you two will still have each other and have time together.

Of course, I have no guarantees — your life isn’t mine. But for me, it wasn’t nearly as bad as it seemed (it’s easy to imagine the worst). Just like it was awesome having an older sister as your friend while at home, it’s really awesome to have an older sister in college to talk to and visit get to experience bits of that life with.

[–] [email protected] 60 points 7 months ago
[–] [email protected] 1 points 8 months ago

Yes, calorie limiting is one of the main benefits and the reason I use IF. I can’t speak authoritatively to any other benefits as I haven’t done any reading on IF in close to a decade. I remember that back then there were a lot of dubious claims about it “boosting metabolism” and such. But I haven’t looked at the state of research on IF in a long time.

6
submitted 9 months ago* (last edited 9 months ago) by [email protected] to c/[email protected]
 

iOS app. Latest version (2.3.1).

When viewing a video from in a post if you swipe the playback position (attempting to skip forward), the app freaks out. It appears to be attempting to both interact with the video controls and swipe to the previous screen at the same time. At this point, both windows are active. The “back button no longer works. If I pick a different tab, nothing loads. I have to force close the app and reopen it.

In the screen recording, at 5s in I attempt to swipe on the video control. At that point most taps on the screen just move the split between the two windows. Moving the split fully does not resolve anything.

 

I just found a workaround for when party members fail to follow you!

I’m guessing y’all have been having this happen a lot too: you jump from one platform to another. Maybe one or two party members follow you… or maybe they all just stand on the ledge, picking their noses. They can all make the jump. Why won’t they join you?… So now you have to ungroup your party, manually make each laggard jump over, and regroup. It’s been maddening lately as I’m in an area with lots of jumping and having this happen very frequently.

Solution (and tl;dr): Simply ungroup and regroup. This seems to reset all your party members’ pathfinding and get them “unstuck” so they will jump over properly. I’m guessing this will solve other similar pathfinding issues as well.

This is such a simple workaround I’m surprised it took me so long to figure it out. I hope it helps someone else.

 

One of my daughter’s works.

113
lock screen (lemm.ee)
submitted 2 years ago* (last edited 2 years ago) by [email protected] to c/[email protected]
 

I’ve been using a version of this C&H Lock Screen for my phone for at least 10 years.

Edit: I couldn't find it, so I recreated it. On iPhone I used the duotone background filter on the uncolorized version. I also created an approximation of the duotone version enjoy!

https://files.catbox.moe/jwam1h.jpeg

https://files.catbox.moe/ewt79n.jpeg

Edit 2: another crack at the colorized version. This is closer.

https://files.catbox.moe/3p36nh.jpeg

Alternate image host: https://postimg.cc/gallery/nM7GwKL

9
submitted 2 years ago* (last edited 2 years ago) by [email protected] to c/[email protected]
 

I’m running 26.0 on iOS. I’m pretty sure this issue was happening on prior versions as well.

NSfW posts are not being blurred in feed. I’ve tried toggling the Blur NSFW option to “never”, browsing, and then going back and setting it to “in feed”, but nothing is coming up blurred. The issue isn’t that I am seeing NSFW content that isn’t properly labeled; the posts are marked NSFW.

I’ve searched the community and the GitHub issue log and don’t see this being mentioned, so I’m starting to think it’s an issue with my device/install. Are other people on iOS getting the proper behavior? Any tips to get things working right?

I’m going to try deleting and “reinstalling” voyager and will report back in a couple of minutes.

Edit: I deleted the voyager bookmark and “reinstalled” by creating a desktop bookmark from wefwef.app. I have put all my settings back and blur is working fine now.

Since there isn’t any real uninstall or reinstall to do, I suspect that what I’ve done is switch where my voyager bookmark was pointing. I am unsure where it was before. Probably voyager.lemm.ee. I think it must have been different as all my settings were gone. Now I’m going to see what happens if I create a second bookmark to that instance and whether my prior settings and issue are there…

Edit 2: I can now conclude that I don’t know how these bookmarked web app thingies work. But deleting my old bookmark and adding a new one (perhaps pointing to a different location) worked. This concludes my Ted talk.

 

I just started using voyager. It shows net upvotes (or downvotes) on a post. Eg, if a post had 20 upvotes and 5 downvotes, it appears to just be showing 15 upvotes, which is the net of the two. Is there somewhere I can see the separate vote counts?

 

Taken from my campsite. Beautiful place.

Side question: any preferred image hosts? I kept getting a json error trying to use the built in image upload, even shrinking the photo to ~500kb. Trying catbox.moe for this one…

view more: next ›