Good question, nah there isn't.
Towerofpain11
I have tried putting it on the top when I built it but there isn't enough clearance. The only thing I can do is rotate the radiator and block :(
I can't hear any gurgling. I'm going to try and feel out a small hum in the block. I am quite deaf though so I'll get a friend to help me with that. Then I'll check all the connections.
Less than a minute. I've just read somewhere that I should be able to feel a small hum in the block, I'm going to check for that next.
Nah I reapplied it again. Every time I take it off I clean it and do it again.
I've changed the orientation so that the radiator hoses are at the bottom (front mounted) and the block has the hoses on the side, with the hoses slightly pointing down. It's still heating up.
The other side
This is what when cooling paste looks like after I've taken it off. This first PC I've built, so still learning.
The radiator is mounted to the front (no room up top). The hoses fed from the top of the radiator (slightly higher than the block). Should I rotate this around so the hoses come out the bottom?
Thank you for taking the time to write this. That was an awesome read!
This looks awesome. Reminds me of the automations in Frostpunk.
Foodland if you're in SA