this post was submitted on 12 May 2025

561 points (98.4% liked)

iiiiiiitttttttttttt

760 readers

29 users here now

you know the computer thing is it plugged in?

A community for memes and posts about tech and IT related rage.

founded 1 month ago

MODERATORS

[email protected]

561

Lazerjet 4050 (programming.dev)

submitted 3 weeks ago by [email protected] to c/[email protected]

58 comments fedilink hide all child comments

Transcript

A piece of paper on an old printer (a laserjet 4050 to be specific. It says: "Hello, My name is LaserJet 4050 and I was made in 1999. I’ve been doing my job printing your documents for many many years, however I think the motor that powers my paper feeder is bad. This makes me sad because I’m not able to do my job very reliably. As such, I am formally presenting this document as a letter of resignation. IT is working on finding a replacement for me, but for the time being, I apologize if I tell you I have a paper jam. Please allow me to refer you to my coworker, LaserJet 3390. 3390 resides outside of Ray’s office and can be reached at: Please accept my sincerest apologies for failing. Thank you for replacing my toner and restocking my paper tray. It’s been a wonderful 14 years of working together. Much love, LaserJet 4050

top 50 comments

sorted by: hot top controversial new old

[–] [email protected] 98 points 3 weeks ago

Another resignation due to burnout.

[–] [email protected] 71 points 3 weeks ago* (last edited 3 weeks ago) (4 children)

That era when HP made unkillable printers. Boss made me chunk a couple of these (think they were 4020s?). "But all they need is a $30 kit! Be like new for 10-20 thousand more pages!"

Drivers? ANY version of Linux or Windows would run 'em. Got a JetDirect card? ($15 on eBay.) Unscrew 2 screws, shove it in, turn it on. Boom. You got a network printer. I deployed Linux Lite in a kiosk for people to apply for jobs. Printed flawlessly, no downloads, and I sucked (still do) at Linux.

Anyone remember the LaserJet III, IV and Vs!? Does it power on? It works. Little jammy? Get a belt kit that any idiot, even me, can install.

Had a 36" 630c (model?) that was a fucking beast. Left it at my last job, didn't want to tote it home and get new cartridges. The belts looked like tires popping steel threads. Still worked. Again, on any OS. That machine was top-of-line for Windows 3.11 for Workgroups, was still flying high on Win10 with OS native drivers.

Got a P1102w work gave me 7-years ago. Beastly. Never had to fuck with parts, $20 toner cartridges still available.
15-years old, rocks out. Win10 had me wrestling with drivers for a brief period, updates cured it. Win11 runs it fine. And does wireless, if you're a barbarian.

End of a fucking era. The world has been stolen from you my young friends! STOLEN!

[–] [email protected] 20 points 3 weeks ago (3 children)

So you are telling me, that there was a time when peinters werent the hell-spawn that they are now?

[–] [email protected] 16 points 3 weeks ago (1 children)

Oh, no, they always sucked, but it was mostly a drivers/OS issue.

NT 4 and Win2k were about the peak of printer not-as-much-hell, but then Microsoft decided to move the driver into the kernel for Vista and later (maybe XP), and back to shit it went.

And then vendors tightened their belts and found every way possible to make printers even more cheaply, pushed hard on inkjets, and now it's all worse than it ever was.

[–] [email protected] 7 points 3 weeks ago

To be fair, they had their mechanical complications, too. Some more, some less but most of them were always good for a nasty surprise in an unexpecing moment.

[–] [email protected] 8 points 3 weeks ago

No, they were demons, they just did their job.

[–] [email protected] 6 points 3 weeks ago* (last edited 3 weeks ago)

Network laser printers that use standardized protocols like PCL5/6 have always been and still are pretty solid. They're just not cheap when it comes to initial costs.

[–] [email protected] 11 points 3 weeks ago

Last job I had, I got tasked with setting up a server that would talk to all our network printers over SNMP and monitor their print counts and toner levels. In the process of that, I learned that one of our old LaserJet 8000s had 1.2 million pages printed over its 20 years of life. Old girl was still chugging along and never needed anything but toner.

[–] [email protected] 7 points 3 weeks ago

my boss tossed a 4mp because 'it was noisy'. Took it home, cleaned the belts, then continued to use it for 12 years before replacing it with a brother color laser.

Man HP used to make awesome shit. Damned shame what they became.

[–] [email protected] 3 points 3 weeks ago (1 children)

I still use an HP laserjet 1320n from 2001 so. Works instantly for the probably 10-15 pages I print a year. I haven't put toner in it for about a decade. The hp print app even works with it so I can print from my phone.

load more comments (1 replies)

[–] [email protected] 36 points 3 weeks ago (3 children)

Is this is repost from 2013?

[–] [email protected] 28 points 3 weeks ago (5 children)

I was kind of surprised to see one of those still running for 26 years until I reached that part of the letter, although in my experience those old LaserJets were pretty robust compared to the more consumer-oriented devices of that era, let alone today’s models which mainly exist to lock buyers into ink subscriptions.

[–] [email protected] 10 points 3 weeks ago

What's the point of selling a good printer when you can sell a much worse version for a little cheaper and with bigger margins, replacing the models at ever increasing rates but never improving them?

Or discontinue ink for printers that do run for years trying to not piss off too many enterprise customers and vendor locking them with service contracts in the meantime?

What about hoarding patents so no new companies can compete without the fear of litigation by billion dollar companies?

[–] [email protected] 7 points 3 weeks ago

Every school district IT department has like dozens of these 4050s in service that WONT DIE, and it’s amazing. I wish they still made them.

[–] [email protected] 5 points 3 weeks ago

I still have a 4100 or maybe a 4200 (one or two revisions up from the one in the pic) that works just fine although it could use a new fuser that I don’t want to spend the money on. The HP laserjets of that era were absolute bulletproof monsters.

[–] adarza 5 points 3 weeks ago

i have one of the early 'consumer oriented' mass-market models, a 4L. only recently retired due to finally running out of consumables and parts for it.

[–] [email protected] 4 points 3 weeks ago

I have a deskjet 990 (i think) working fine in the attic. Just plug in the cable and it works.

[–] [email protected] 7 points 3 weeks ago

Possibly 2014, to account for LJ's traineeship.

[–] [email protected] 7 points 3 weeks ago (1 children)

Most likely, yes.

edit: its from 2022.

[–] [email protected] 7 points 3 weeks ago (1 children)

So what was it doing for that nine year gap in its resume?

[–] [email protected] 9 points 3 weeks ago (1 children)

Printing, I'd assume.

[–] [email protected] 3 points 3 weeks ago (1 children)

For other people?

[–] [email protected] 9 points 3 weeks ago

For a business. Originally freelance, but it eventually got roped into a full-time job.

[–] [email protected] 31 points 3 weeks ago (1 children)

Laserjet is a good, modern androgynous name for any child

[–] [email protected] 6 points 3 weeks ago

I'd consider it for myself if I was still in the market for a new name.

[–] [email protected] 21 points 3 weeks ago (1 children)

We need open source laser printers, to avoid the inkjet mafia as far as possible.

[–] [email protected] 10 points 3 weeks ago (1 children)

Printers are complicated and patent encumbered. Framework took a look at making one, and they noped right out.

[–] [email protected] 8 points 3 weeks ago (1 children)

Lots of tech more than 20 years old and thus free from patents available to use. Lots of office printers are older than that, still!

But yeah, making them reliable is haaaard

load more comments (1 replies)

[–] [email protected] 19 points 3 weeks ago (1 children)

Time to take out a second mortgage and pour out a tiny thimble of printer ink.

[–] [email protected] 12 points 3 weeks ago

$10,000/gallon. If someone made a car than ran on ink, they could bankrupt themselves very efficiently.

[–] [email protected] 18 points 3 weeks ago* (last edited 3 weeks ago) (1 children)

If I remember correctly, this model had an easy hackable display. I changed ours to say "Insert Coin" but no one in our IT group mentioned it so I eventually switched it back. It was supposed to have been decommissioned but someone kept it around to print out short log files.

[–] August27th 16 points 3 weeks ago

On April Fools Day many many years ago, I set the office printer (a sister model to this one) to say "Out of cheese", which got one person very confused. I thought about making it say insert coin, but if anyone actually did it, it would be me having to fix that printer, and it was our most beloved printer in the office, so I decided on just the clearly absurd

[–] [email protected] 17 points 3 weeks ago

Back when every HP printer worked on the LaserJet 4P driver that was less than 1MB.

[–] [email protected] 14 points 3 weeks ago

Wholesome IT department

[–] [email protected] 13 points 3 weeks ago (6 children)

I mean, electric motors are pretty standard. If the problem with the printer is a bad motor then you could probably just replace that part. The main question would be how easy it is to disassemble the printer to get at the motor.

[–] [email protected] 14 points 3 weeks ago (1 children)

Disassembly of these are pretty easy, when I did tech support for HP, I could tear one down to where I could access those motors in a few minutes. Newer ones were progressively more difficult, but the "business class" printers were always relatively easy to repair.

The difficult part would indeed be sourcing the correct motor, fortunately the 4050 only has one motor, and from a quick google search it can be bought for about $20.

That being said, I doubt it's the motor - I never encountered a failed motor on a 4000-series laserjet. It's more likely a worn roller, paper sensor, or the solenoid that handles the paper pickup that has failed.

[–] [email protected] 9 points 3 weeks ago

This is what the internet should be all about, randomly encountering a guru who can troubleshoot and give you pointers to repair your 25 year old printer.

Much respect, sir. Have an amazing day!

load more comments (5 replies)

[–] rekabis 10 points 3 weeks ago (1 children)

I still have my original 4050DTN. It needs a new fuser and rollers, but otherwise it’s been absolutely loyal and bulletproof.

[–] [email protected] 2 points 3 weeks ago

Same!! I replaced the rollers in 2019 and it's been working great. We got it used in 2001.

[–] [email protected] 8 points 3 weeks ago

🫡

[–] [email protected] 7 points 3 weeks ago

[–] [email protected] 4 points 3 weeks ago

I have a 4000 that still chooches great. I just have to be careful replacing toner because there's a broken arm that has to seat in the right spot to print properly.

It will be the last HP I buy, because I'll be fucked if I buy anything that HP produces today.

[–] [email protected] 3 points 3 weeks ago

I had a LaserJet 4M until just a few years ago. It still had a BNC port on the back.

Damn that printer was the goat.

[–] [email protected] 3 points 3 weeks ago (1 children)

My good, old LaserJet p2015n has been up and running for I really can't remember how long. I might even have been longer than it's predecessor, an HP InkJet 500. OTOH the ij500 was already old when I got it and it didn't really break. We just put our last PC that had a parallel port out of service.

[–] [email protected] 2 points 3 weeks ago (1 children)

I had a 1996 IBM laser that finally gave up in 2024. That's nearly 30 years.

And it's probably fixable, most likely just a sensor that thinks it sees paper.

load more comments (1 replies)

[–] Omega_Jimes 2 points 3 weeks ago (1 children)

More like Lazier-Jet.

[–] [email protected] 2 points 3 weeks ago

Boss, is that you?

load more comments