7EP6vuI

joined 7 months ago
[–] [email protected] 3 points 1 week ago

Rummikub aber mit Rommé Karten. Man hat dann etwas mehr Joker.

[–] [email protected] 22 points 1 week ago

/dev/urandom

[–] [email protected] 2 points 1 week ago

hab seit einigen jahren eine spring pfanne mit 28cm durchmesser und glasdeckel. möchte sie nicht mehr missen.

langsam bilden sich die ersten kratzer (obwohl ich immer versuche sehr vorsichtig zu sein)...

ich beachte meistens nicht die tips von @[email protected] und ja, es klebt dann öfter mal an, aber wenn man den ersten pfannkuchen mit etwas mehr öl macht, klappt es, und mit der zeit bekommt man dann schon auch den dreh raus...

[–] [email protected] 1 points 2 weeks ago

Gibt auch schon andere Anwärter, die bisher keinen Erfolg hatten: Giesinger Bräu (von 2021!). Bei der sz wird auch schon das Münchner Kindl-Brauerei angeteasert.

[–] [email protected] 3 points 2 weeks ago

compression is good when copying over the network, but would just waste cpu time when copying to a usb stick.

[–] [email protected] 2 points 2 weeks ago

i thought this too, because i don't like the Oktoberfest. but then i looked at the numbers:

Von zehn Besuchern kommen statistisch sechs aus München und dem Umland, einer aus dem übrigen Bayern, einer aus dem übrigen Deutschland und zwei aus dem Ausland.[75]

https://de.wikipedia.org/wiki/Oktoberfest#Besucher

translated:

out of ten guests, 6 are from Munich or surrounding, 1 from the rest of Bavaria, 1 from the rest of Germany and 2 from abroad.

[–] [email protected] 8 points 1 month ago

nicht drüber aufregen, nicht mehr kaufen!

das ist der einzige weg, wie es die unternehmen lernen. warum sollten sie damit aufhören wenn es weiter gekauft wird? wären ja auch irgendwie doof, wenn sie es dann nicht machen würden, und sich das entgehen lassen?

[–] [email protected] 7 points 2 months ago (4 children)

i think its a military map. in the lower right you can see words on German, English and something eastern.

I had some note pad by the same brand, and its quite nice paper, not the usual printer paper, but smoother. if feels high quality. always wondered what's the name for this paper. maybe i should search for this note pad...

[–] [email protected] 9 points 2 months ago (3 children)

Meiner stammt von der Kommandozeile: head /dev/urandom | base64 und dann ein kleines Stückchen ohne Sonderzeichen kopiert. Kreativität und popkulturelle Referenzen waren noch nie so meins.

[–] [email protected] 5 points 2 months ago (5 children)
[–] [email protected] 4 points 2 months ago (2 children)

hast du ne quelle dafür? hört sich interessant an.

[–] [email protected] 1 points 2 months ago (3 children)

aber warum heißt es dann steueroase? gefallen dir oasen wohl nicht? find ich schon beeindruckend. Auf den Cayman Islands könnte man es schon auch aushalten, findest du nicht? und die sind auf der Schwarzen Liste der Steueroasen der EU.

 

I'm a newbie to ActivityPub so please be patient with me.

All intros into ActivityPub speak about how a user of a server A subscribes to a specific community from server B, and then server A will be informed about changes in that community.

But on lemmy it's possible to look at the posts of all communities. For a single concrete community it would be relatively easy: server A gets the request to serve the top post of a community on server B, so A simple asks B for the posts.

But there is also the "posts from all communities" tab on the lemmy front page. This opens questions:

Does each lemmy instance has a full copy of all posts of all communities? If this is true: How are new Instances discovered? Is each Instance distributing all updates to all other Instances?

If each lemmy instance has only a partial dataset (this theory is backed by [1] "Only if a least one user on your instance subscribes to the remote community, will the community send updates to your instance.") then how is the "all posts" view composed? is it in reality not "all" but only "all posts that at least one user of this instance is subscribed to"?

If this is the case: what happens if a bad actor subscribes to all communities of all servers? Is there a maximum number of subscriptions per user?

The source of those questions is, that I'm looking for a way to subscribe to all events of all lemmy instances, to be able to build statistics about upvotes, new posts, comments etc. There seems to be a similar API endpoint for mastadon [2] but nothing for lemmy?!

 

Cathrin, Tim, Sophie, Frank und Susanne sind nicht nur Freunde, sondern auch Familie. Gemeinsam suchen sie nach Glück, Freude, Liebe und manchmal auch einfach nur nach Geld für die nächste Miete.

Ganz nette Unterhaltung, erinnert schon ein bisschen an Seinfeld aber die AI-Zwischenblenden sind auf jeden Fall auch eine Erwähnung wert.

 

The Outlaws ist eine britische Comedyserie. Sie ist eine Koproduktion von Amazon und BBC. Die Serie folgt sieben Fremden aus unterschiedlichen Lebensbereichen, die gemeinsam ihre Sozialstunden ableisten müssen.

https://de.wikipedia.org/wiki/The_Outlaws_(Fernsehserie)

Derzeit sind zwei Staffeln online. Sehr spannend und lustig zugleich.

 

Dear Linux-Wizards,

I have some USB flash drive that outputs the following errors, when i plug it in:

VGscsi 6:0:0:0: Direct-Access     SMI01    USB DISK01       1100 PQ: 0 ANSI: 6
VGsd 6:0:0:0: [sdc] 491520000 512-byte logical blocks: (252 GB/234 GiB)
VGsd 6:0:0:0: [sdc] Write Protect is off
VGsd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
VGsd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
VGsd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
VGsd 6:0:0:0: [sdc] tag#0 Sense Key : Not Ready [current] 
VGsd 6:0:0:0: [sdc] tag#0 Add. Sense: Medium not present
VGsd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
VGI/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
VGBuffer I/O error on dev sdc, logical block 0, async page read
VGsd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
VGsd 6:0:0:0: [sdc] tag#0 Sense Key : Not Ready [current] 
VGsd 6:0:0:0: [sdc] tag#0 Add. Sense: Medium not present
VGsd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
VGI/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
VGBuffer I/O error on dev sdc, logical block 0, async page read
VGldm_validate_partition_table(): Disk read failed.
VGsd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
VGsd 6:0:0:0: [sdc] tag#0 Sense Key : Not Ready [current] 
VGsd 6:0:0:0: [sdc] tag#0 Add. Sense: Medium not present
VGsd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
VGI/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
VGBuffer I/O error on dev sdc, logical block 0, async page read
VG sdc: unable to read partition table
VGsd 6:0:0:0: [sdc] Attached SCSI removable disk
VGsd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
VGsd 6:0:0:0: [sdc] tag#0 Sense Key : Not Ready [current] 
VGsd 6:0:0:0: [sdc] tag#0 Add. Sense: Medium not present
VGsd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 1d 4b ff 80 00 00 08 00
VGI/O error, dev sdc, sector 491519872 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
VGsd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
VGsd 6:0:0:0: [sdc] tag#0 Sense Key : Not Ready [current] 
VGsd 6:0:0:0: [sdc] tag#0 Add. Sense: Medium not present
VGsd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 1d 4b ff 80 00 00 08 00
VGI/O error, dev sdc, sector 491519872 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
VGBuffer I/O error on dev sdc, logical block 61439984, async page read

lsblk output looks okayish, disk size is reported correctly.

sdc      8:32   1 234,4G  0 disk

When i first noticed, i hoped maybe only the first Sectors are broken, but now i'm trying with ddrescue and ddrescue -d and see the similar messages:

I/O error, dev sdc, sector 237172352 op 0x0:(READ) flags 0x800 phys_seg 15 prio class 2
sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 6:0:0:0: [sdc] tag#0 Sense Key : Not Ready [current] 
sd 6:0:0:0: [sdc] tag#0 Add. Sense: Medium not present
sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 0e 22 f7 00 00 00 80 00

It's a USB-3 flash drive, so i also tried an USB-2 port hoping that maybe its some connection thing, but it did not help, I see the same error messages.

Normally USB flash drives warm a bit when reading/writing data, this one ist still cold after 25 minutes of ddrecue

Is there anything else i can do?

Backstory is: I was helping someone with their Windows PC and unplugged the stick without ejecting it, then Windows complained and i pressed to "scan and repair drive" which took a while. At 80% a error message appeared similar to: "insert medium into drive" When clicking OK the message reappeared after one or two seconds. It only stopped after unplugging the flash drive.

The user already said something about folders appearing at wrong locations at the drive, so i hope i did not kill the drive but it was already dying. But still feeling bad about this, so i want to try everything and even reach out to you :-)

1
submitted 7 months ago* (last edited 7 months ago) by [email protected] to c/[email protected]
view more: next ›